 998PI
PIR Motion Detector 
  35' x 45' (10.6m x 13.7m) coverage pattern
Immune to pets up to 40 lbs.
Split-Zone Optics technology
EZ-Mount™ features for fast, trouble free
installation
| Split-Zone
Optics splits each zone into two stacked sub-zones. Each sub-zone is the same
size as the original, but only has about half the sensitivity. To generate an alarm, a
target must intercept both sub-zones simultaneously. A human target is sufficiently large
enough while pets up to 40 lbs remain undetected. |
 |
 |
998PI Specifications:
| Detection Method |
Passive infrared |
| Coverage |
Pet Immune Lens
35' x 45' (10.6m x 13.7m), 90° |
| Detection Zones |
Pet Immune Lens - 30 zones (8 long range, 7 over 7 intermediate, 4 over 4
short range) |
| Pulse Count |
Intermediate or Standard selectable via DIP switch
NOTE: Use standard for pet immune applications |
| Detectable Walk Rate |
0.5-10ft/sec (.15-3m/sec) |
| Mount Height |
7.5' (2.3m), nominal |
| Indicators |
Red LED with enable/disable via DIP switch |
| Alarm Relay |
Form A, SPST, 90mA@16VDC 15-ohm protective resistor |
| Input Voltage |
10 - 16VDC
(Voltage reversal makes PIR inoperative) |
| Current |
18 mA (non-alarm), nominal
18 mA (alarm), nominal |
| Standby |
Power source should be capable of at least 4 hours of battery standby |
| Operating Temp |
14ºF - 122ºF (-10ºC to +50ºC) |
| Operating Humidity |
Up to 95% RH (max.), non-condensing |
| Dimensions |
25/8" W x 43/8" H x 21/8"
D
(67mm x 111mm x 54mm) |
|
