6220 Series - Security System Printers On site printing has never been easier than with ADEMCO's 6220 Series of security system printers. A perfect complement to your fire, burglary or access control systems; these printers are feature-rich yet compact and simple to operate.   What's more, there is no need to worry about thermal paper because the printers use "off-the-shelf" adding machine paper. APPLICATIONS: burglary, fire and access control printing of programming/setup event logging permanent audit trail/records system test and inspection service and diagnostics sales demos medical refrigeration inventory control QA test results automotive diagnostic results hard copy credit card verification remote message printer works with any product with a RS232 or parallel port TO: Interface information  Character format  Protocol  Buffer capacity   Print method Character matrix  Character per line  Character spacing  Wraparound capabilities Line feed spacing  Print speed  Paper  Power  AC voltage  DC voltage  External dimensions   Operating temperature  Print head life   Ribbon life   Options  Ordering information Interface information   - Wide range of BAUD rates, 300, 600, 1200, 2400, 4800, 9600, 19,2000   - Voltage levels:  RS-232C: -9 volts to +9 volts                             Parallel: 0 volts to ±5 volts Character format   - ASCII character set - 10 bits per character required, 7 or 8 of which are data bits   - Bitmapped graphics - 10 bits per character required, 8 or which are data bits Protocol   - Busy signal - Clear to Send (CTS)   - XON-XOFF Buffer capacity: 9.5K standard   - Full column width character buffering is provided for line character buffer. The printer stores      500 characters while printing to free up the host or sending device Print method   - Impact dot matrix Character matrix   - 6 x 8 dot matrix characters per line: 24, 32 or 40 selectable Character per line   - 24, 32 or 40 selectable Character spacing   - 24 column: 12.8 character/inch   - 32 column: 17 character/inch   - 40 column: 21 characters/inch Wraparound capabilities   - When data exceeds the line capacity, it automatically wraps around Line feed spacing   - 7.6 lines per inch, character mode   - 9.1 lines per inch, graphic mode Print speed   - 38 lines per minute (24-column)   - 60 lines per minute when configured from fast print (5 x 5 character matrix) Paper   - Standard: 2.25"W x 2.75"D; 0.44" I.D. adding machine   - Supports 2 part carbonless paper Power   - 1 watt (idle), 10 watts (printing) AC voltage   - 9 VAC (120 VAC step-down converter included) Multi-national converters optional DC voltage   - Optional on all units, 9-12 VDC   - 100 mA idle; 1500 mA, 2.9A peak for full column printing External dimensions   - 4"W x 4/5"L x 2.16"H Operating temperature   - 41°F to 104°F (5°C to 40°) Print head life   - 500,000 lines mean character before failure Ribbon life   - Black: 200,000 characters   - Large roll paper: 12,500 lines Options   - Printer battery pack   - DC power modification   - Wall mount bracket (included) Ordering Information   - 6220S Serial Printer*   - 6220P Parallel Printer*   - 6220BB Battery Backup   - 6220RPR Ribbon Paper Refill Pak 2 ribbons/4 rolls paper *Includes printer, manual, 1 paper roll and 1 convenient wall mount bracket Back To Top

(Eagle Security Systems is an independent alarm contractor.  While not related to ADEMCO, Eagle installs ADEMCO products.  Eagle Security is located at 1029 28th St. SE, Grand Rapids, MI 49508.  Phone:   616-243-1255  Email:   security@eagletask.com   Fax:    616-243-2339.)

Copyright © Eagle Security-1998.   All rights reserved.